{"title":"All Scrub Pad Brushes","description":"\u003cp\u003eMost aggressive. No bristle.\u003c\/p\u003e","products":[{"product_id":"e-force","title":"E-FORCE (for Low-E Glass)","description":"\u003cp\u003e\u003cstrong\u003eE-FORCE, for Low-E Glass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe last bastion of Window Cleaning (well the latest challenge) is to clean Low-E Glass EFFICIENTLY within the guidelines of the Manufacturer’s specifications.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003eLow-E coated glass has a very thin metal coating on the interior glass surface. This tin coating gives the window its improved thermal insulation and solar control performance compared to ordinary clear glass. The coated surface side of Low-E Glass is to be cleaned differently to ordinary glass.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFirstly, we should say this will not affect every window cleaner.  If you service well established homes, you are unlikely to come across Low-E glass (heat efficient). If you service an area that gets very cold, or very hot, you are likely to service 'double glazed' windows, in which case, if Low-E Glass is installed, the Tin-Side will be on the Inside!\u003c\/p\u003e\n\u003cp\u003eThe application for E-FORCE is in towns and cities with new home builds with single glazed instals  - i.e. the outside is normal glass, and the inside is Low-E coated. The Low-E coating is EXTREMELY soft and easily marked - so much so that the manufacturers recommend ONLY soft cloth cleaning (see links at bottom of page). \u003c\/p\u003e\n\u003cp\u003eAs more and more homes are built with Low-E glass, our problem has multiplied … and the only close solution is Unger’s STINGRAY which does not offer efficiency, or affordability. \u003c\/p\u003e\n\u003cp\u003eE-FORCE is our new Low-E Glass Tool Set.  E-FORCE also comes with a technique.  Cleaning Low-E glass is not fast - and use the wrong tools on the glass, and you void the warranty, potentially triggering an insurance claim against you that your insurance company may not be happy to cover.\u003c\/p\u003e\n\u003cp\u003eAccordingly, you can only use :  SOFT CLOTHS and MICROFIBER.\u003c\/p\u003e\n\u003cp\u003eMICROFIBER (used correctly) 'grabs' dirt and holds it - that is what makes microfiber special - it can even grab and hold bacteria!  So the first E-FORCE SCRUB (Step 1) is to use a long-loop (increased surface area) microfiber to grab the dirt off the window.  \u003c\/p\u003e\n\u003cp\u003eWe need to use a fine mist of water (or water and iso mix) as your 'surfactant ' to get the 'grab' microfiber to slide across the Low-E surface. Inevitably , this pad leaves a super fine film of water after each pass which, when the water evaporates, leaves a very fine film of dirt on the window that can often only be seen at sunrise and sunset.  \u003c\/p\u003e\n\u003cp\u003eThis is why Step 2 is critical - it is a 'polishing' of the window with a dedicated glass polishing microfiber, and no water.  This is why the microfiber of choice for Step 2 is a 'shiny' microfiber.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in your Pack :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2 x E-FORCE units with MICROFIBER SCRUBS\u003c\/p\u003e\n\u003cp\u003eNote : POLE, and straight POLE STEM ADAPTORS are not included  - ideally use 6\" REACH MASTER for better over-frame reach. Images are demonstrative only. \u003c\/p\u003e\n\u003ch3\u003eGlass Manufacturer Websites with Low-E Glass cleaning guidelines : \u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.uswindow-door.com\"\u003ewww.uswindow-door.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.viridianglass.com\/\"\u003ehttps:\/\/www.viridianglass.com\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.uswindow-door.com\"\u003ewww.uswindow-door.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.pella.com\/\"\u003ehttps:\/\/www.pella.com\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/andersenwindows.com\"\u003eandersenwindows.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/capega.co.za\/\"\u003ehttp:\/\/capega.co.za\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.modernglass.com.au\"\u003ewww.modernglass.com.au\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.customglassproducts.com.au\"\u003ewww.customglassproducts.com.au\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eThe BEST reference information on how to clean Low-E Glass \u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHand Cleaning Low 'E' Glass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLow 'E' Glass has a thin coating to the inner face of the glass. It is this hard and durable coating which gives the glass its thermal  insulation and solar control performance compared to ordinary clear glass. The coated surface of Low 'E' glass does not need to be cleaned differently to ordinary glass and the following guidelines are recommended for the best hand cleaning results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHand cleaning of the coated (interior) surface of the Low 'E' glass to visibly remove accumulated dust or fingerprints, can be accomplished using a number of different glass cleaning products. The exterior surface of the glass is not coated and can be cleaned in the same fashion as ordinary glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Routine Glass Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA mixture of one part vinegar with ten parts water  Vinegar based glass cleaners have generally demonstrated an ability to provide a clean and streak free glass surface. Do not use ammonia based or alcohol based glass cleaners because these cleaners tend to leave visible streaks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine Cleaning Procedure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlood the glass surface with the spray on cleaning solution or with a cloth saturated in cleaning solution. Be generous with the amount of solution applied.\u003c\/p\u003e\n\u003cp\u003eScrub the wet area with a clean, lint-free towel or cloth.\u003c\/p\u003e\n\u003cp\u003eWipe dry with a dry, clean lint free towel or cloth. DO NOT USE A SQUEEGEE on the Low'E' coated (interior) surface.\u003c\/p\u003e\n\u003cp\u003eTo prevent streaking, stop wiping when the glass is almost dry and there is a uniform film of moisture left on the glass surface.\u003c\/p\u003e\n\u003cp\u003eUnder no circumstances should razor blades or squeegees be used on the low E coated (interior) face of the glass\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpot Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOccasionally, spot cleaning may be required to remove stubborn dirt or foreign material that may adhere to the Low 'E' coated surface. Spot cleaning products work to remove markings from grease, oil, tape adhesive and crayons or other waxy material as well as paint and rub-off marks from plastics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Spot Cleaning Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcetone (solvent available from hardware stores)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpot Cleaning Procedures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarefully follow the chemical manufacturers instructions\u003c\/p\u003e\n\u003cp\u003eApply a small quantity of the cleaner listed above to clean, wet cloth or towel  Rub onareas of glass needing spot cleaning\u003c\/p\u003e\n\u003cp\u003eWipe clean using a dry, lint free towel or cloth followed by a routine cleaning procedure\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecialised Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo not use razor blades, steel wool or other metallic objects on the Low 'E' coated surface. If metallic objects contact the coated surface, a thin layer of metal removed from the object may be deposited on the Low 'E' surface which results in a discolored stain which is difficult or impossible to remove using normal cleaning procedures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Specalised Cleaning Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHydrochloric Acid (available from hardware stores) diluted to 99% water to 1% hydrochloric acid\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecialised Cleaning Procedure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarefully follow the chemical manufacturers' instructions\u003c\/p\u003e\n\u003cp\u003eApply a small quantity of the specialized cleaner listed above to a clean, wet cloth or towel. A cotton bud may be used for thin line type marks.\u003c\/p\u003e\n\u003cp\u003eRub on areas of glass needing cleaning\u003c\/p\u003e\n\u003cp\u003eWipe clean using a dry, lint-free towel or cloth followed by a routine cleaning procedure.\u003c\/p\u003e\n\u003cp\u003eEnsure that the cleaner does not come into contact with framing materials\u003c\/p\u003e\n\u003cp\u003eThe above information is offered for assistance in the application of flat glass products, BUT IT DOES NOT CONSTITUTE A WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Actual performance may vary in particular application.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-converted-space\"\u003eSource:  \u003ca href=\"http:\/\/www.customglassproducts.com.au\" data-mce-fragment=\"1\"\u003ewww.customglassproducts.com.au\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-converted-space\"\u003eE-FORCE is inspired by Byron Guest the 'MODMAN' from Perth, Australia. \u003c\/span\u003e\u003c\/p\u003e","brand":"The Official REACH-iT Store","offers":[{"title":"Default Title","offer_id":45728130728104,"sku":"1-003E-00933","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/7447\/files\/e-force.png?v=1700541406"},{"product_id":"g-force-mop","title":"G-FORCE MOP (Traditional)","description":"\u003cp\u003eNote : This tool is a traditional mop, not the ingenious G-FORCE PRO water fed tool!  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhile we have your attention, 2025 is the year that REACH-iT will totally revolutionize and overhaul traditions of window cleaning that have been in place for over 90 years. The first release in TRAD TOOLS for 2025 is the G-FORCE MOP - always flat on glass - G-FORCE MOP is available as a 14” hand tool with 8 different agitation pads with varying qualities and able to be upgraded to a pole tool (any brand pole) by purchasing an aluminum pole stem adaptor for your current pole.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINTRODUCING G-FORCE MOP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAT JUST $49.95, is like buying a brand new MERCEDES BENZ for 50%OFF.\u003c\/p\u003e\n\u003cp\u003eWith absolute versatility in design and function, G-FORCE MOP will blow you away - and from a sustainability point-of-view, this is not a throw-away tool, all parts and SCRUBS are replaceable.\u003c\/p\u003e\n\u003cp\u003eWatch this video to see more, and we welcome you if you are a first-time REACH-IT customer - your whole world is about to change !\u003c\/p\u003e\n\u003cp\u003eG-FORCE MOP is fitted with RADIAL HANDLE - to use it as a pole tool, please order your aluminum POLE to HANDLE STEM ADAPTOR to match YOUR POLE \u003cspan style=\"color: #ff2a00;\"\u003e\u003ca rel=\"noopener noreferrer\" style=\"color: #ff2a00;\" title=\"POLE STEM ADAPTOR\" href=\"https:\/\/www.futureofcleaning.com\/products\/new-handle-to-pole-stem-adapters\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/span\u003e.  All new REACH-iT poles are supplied with POLE to HANDLE STEM ADAPTOR free.\u003c\/p\u003e","brand":"The Official REACH-iT Store","offers":[{"title":"Default Title","offer_id":50579281936552,"sku":"1-003E-01028","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/7447\/files\/Screenshot_2024-11-29_at_23.49.49.png?v=1732895873"},{"product_id":"g-force-pro-kit-new","title":"G-FORCE PRO 14\" PRO KIT","description":"\u003cp\u003eG-FORCE is ANOTHER REACH-iT INNOVATION (circa 2024) to revolutionize cleaning glass that is 'ground up'. \u003c\/p\u003e\n\u003cp\u003eWhen we clean glass to the ground, whether a store-front, a glass-clad ground floor, or glass balustrades, using a pole is so ergonomically wrong - we become contortionists - crouching, bending over, cleaning sideways etc - it is not good long term!\u003c\/p\u003e\n\u003cp\u003eThe 'G' in G-FORCE stands for 'GYRO' and the GYRO does the 'bending' for you!  You can reach 6FT above your head, to your toes without changing your posture !\u003c\/p\u003e\n\u003cp\u003eG-FORCE PRO Kit comes with an 8FT (extended) carbonfiber pole that has a KEVLAR handle that insulates against getting hot in direct sunlight and offers protection against the risk of electrocution.  We tested many lengths of pole and 8FT is 'the sweet spot'.  As 8FT is also an ideal TRAD POLE, we include our adaptor for the UNGER ERGOTEK pole tip for squeegees and mops. \u003c\/p\u003e\n\u003cp\u003eCleaning glass balustrades with a mop and squeegee often involves moving your center of gravity over the railing.  Using the 6\" REACH MASTER gooseneck (not included), you can clean the other side of a glass balustrade with an upright stance, all your mass on the balcony side. Using the GYRO, you can easily use G-FORCE 'upside down' so the rinse bars are always at the top.\u003c\/p\u003e\n\u003cp\u003eTalking about the orientation of the rinse jetstreams, there is a case for having them under the tool - when a window is REALLY dirty with dust (eg. farm houses), it is easier to pull the dirty water DOWN rather than pushing it up the window and asking gravity to pull it down - when you are wanting to push the next action up.  By inverting G-FORCE (the benefit of the GYRO), you can do the first pass upside down and get the dirt off in a single downward stroke, then spin it around and next time, rinse bars on the top to make sure the spot-free water is last on the glass. \u003c\/p\u003e\n\u003cp\u003eHave you ever had to clean a glass panel or window with only an inch of space to get your tool in ?  Perfect for G-FORCE.  Whether it is between security rails, or between the glass balustrade that extends to the bottom of a balcony slab (another architectural oversight) - you can slide the swivel base on the chassis of G-FORCE to the full left or right (the same as we do with a squeegee) and slide just the chassis into the space with the handle\/pole fully off-centered.  \u003c\/p\u003e\n\u003cp\u003eWhilst we designed G-FORCE for 'ground glass', many window cleaners have adopted it as one of their 'go to' tools up to 3 stories (above that, the GYRO swivel can't be locked, so it gets hard to control).  As a result, we developed the 18\" chassis that you can buy as an add-on chassis, or as a full alternative hand tool. Of course, all handles are compatible with the RADIAL POLE to HANDLE STEM ADAPTOR.\u003c\/p\u003e\n\u003cp\u003eEFFICIENCY is a combination of increased speed of AGITATION and ON-GLASS-RINSE (eliminating the secondary rinse phase).  To maximize AGITATION, you need to match the SCRUB pad to the DEBRIS on the glass.  That is why we include 6 different types of SCRUB:  \u003c\/p\u003e\n\u003cp\u003eOrange NON-SCRATCH Scrub is your 'go-to' SCRUB for all on-glass applications. This is most like 'bristles'. \u003c\/p\u003e\n\u003cp\u003eBlack CARBORUNDUM is super sharp - almost like super-fine emery paper.  It will not scratch real glass, but it will definitely scratch up any nano treatment on external glass (so test it before using on tempered glass).\u003c\/p\u003e\n\u003cp\u003eYellow TOMCAT is amazing at Bee Poo, and removing the waxy residue. It is truly amazing and remarkably fast. \u003c\/p\u003e\n\u003cp\u003eGreen HULK has an even higher surface friction  - ideal for stuff like seagull bombardments that so not soften quickly with water.\u003c\/p\u003e\n\u003cp\u003eWhite MAGIC ERAZER is able to remove sticker residue, and silicon creep from the window seals. \u003c\/p\u003e\n\u003cp\u003eGrey MICROFIBER is not really a SCRUB as microfiber is really designed as a grab-and-hold cleaning fabric.  When you are facing organics on glass, fingerprints, oils from pollution, or smoke from BBQ's  - add detergent to your MICROFIBER SCRUB to break down the organics.\u003c\/p\u003e\n\u003cp\u003eBy choosing the correct SCRUB, you will reduce the number of AGITATION strokes, thereby increasing your efficiency which translates into an increased HOURLY RATE. \u003c\/p\u003e\n\u003cp\u003eAlso available is G-FORCE solely as a hand-tool.  If you already own a suitable pole, just add to your order an aluminum POLE to HANDLE STEM ADAPTOR for your brand pole and then you can add G-FORCE, and any other RADIAL TOOL and Z-FORCE.\u003c\/p\u003e","brand":"The Official REACH-iT Store","offers":[{"title":"Default Title","offer_id":55329218035880,"sku":"1-001E-00883","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/7447\/files\/G-FORCE-PRO-KIT.jpg?v=1773458524"},{"product_id":"g-force-hand-tool-only","title":"G-FORCE PRO 14\" HAND TOOL only","description":"\u003cp\u003eG-FORCE is ANOTHER REACH-iT INNOVATION (circa 2024) to revolutionize cleaning glass that is 'ground up'. \u003c\/p\u003e\n\u003cp\u003eThe G-FORCE HAND TOOL option is ideal if you a) you only want a hand tool, or if you already have a suitable pole.  Just add to your order an aluminum POLE to HANDLE STEM ADAPTOR for your brand pole and then you can add G-FORCE, and any other RADIAL TOOL and Z-FORCE. If you do not have a suitable pole (we recommend an 8FT extended length), choose G-FORCE PRO KIT. \u003c\/p\u003e\n\u003cp\u003eWhy do you benefit from a pole ?  When we clean glass to the ground, whether a store-front, a glass-clad ground floor, or glass balustrades, using a pole is so ergonomically wrong - we become contortionists - crouching, bending over, cleaning sideways etc - it is not good long term!\u003c\/p\u003e\n\u003cp\u003eThe 'G' in G-FORCE stands for 'GYRO' and the GYRO does the 'bending' for you!  You can reach 6FT above your head, to your toes without changing your posture !\u003c\/p\u003e\n\u003cp\u003eCleaning glass balustrades with a mop and squeegee often involves moving your center of gravity over the railing.  Using the 6\" REACH MASTER gooseneck (not included), you can clean the other side of a glass balustrade with an upright stance, all your mass on the balcony side. Using the GYRO, you can easily use G-FORCE 'upside down' so the rinse bars are always at the top.\u003c\/p\u003e\n\u003cp\u003eTalking about the orientation of the rinse jetstreams, there is a case for having them under the tool - when a window is REALLY dirty with dust (eg. farm houses), it is easier to pull the dirty water DOWN rather than pushing it up the window and asking gravity to pull it down - when you are wanting to push the next action up.  By inverting G-FORCE (the benefit of the GYRO), you can do the first pass upside down and get the dirt off in a single downward stroke, then spin it around and next time, rinse bars on the top to make sure the spot-free water is last on the glass. \u003c\/p\u003e\n\u003cp\u003eHave you ever had to clean a glass panel or window with only an inch of space to get your tool in ?  Perfect for G-FORCE.  Whether it is between security rails, or between the glass balustrade that extends to the bottom of a balcony slab (another architectural oversight) - you can slide the swivel base on the chassis of G-FORCE to the full left or right (the same as we do with a squeegee) and slide just the chassis into the space with the handle\/pole fully off-centered.  \u003c\/p\u003e\n\u003cp\u003eWhilst we designed G-FORCE for 'ground glass', many window cleaners have adopted it as one of their 'go to' tools up to 3 stories (above that, the GYRO swivel can't be locked, so it gets hard to control).  As a result, we developed the 18\" chassis that you can buy as an add-on chassis, or as a full alternative hand tool. Of course, all handles are compatible with the RADIAL POLE to HANDLE STEM ADAPTOR.\u003c\/p\u003e\n\u003cp\u003eEFFICIENCY is a combination of increased speed of AGITATION and ON-GLASS-RINSE (eliminating the secondary rinse phase).  To maximize AGITATION, you need to match the SCRUB pad to the DEBRIS on the glass.  That is why we include 6 different types of SCRUB:  \u003c\/p\u003e\n\u003cp\u003eOrange NON-SCRATCH Scrub is your 'go-to' SCRUB for all on-glass applications. This is most like 'bristles'. \u003c\/p\u003e\n\u003cp\u003eBlack CARBORUNDUM is super sharp - almost like super-fine emery paper.  It will not scratch real glass, but it will definitely scratch up any nano treatment on external glass (so test it before using on tempered glass).\u003c\/p\u003e\n\u003cp\u003eYellow TOMCAT is amazing at Bee Poo, and removing the waxy residue. It is truly amazing and remarkably fast. \u003c\/p\u003e\n\u003cp\u003eGreen HULK has an even higher surface friction  - ideal for stuff like seagull bombardments that so not soften quickly with water.\u003c\/p\u003e\n\u003cp\u003eWhite MAGIC ERAZER is able to remove sticker residue, and silicon creep from the window seals. \u003c\/p\u003e\n\u003cp\u003eGrey MICROFIBER is not really a SCRUB as microfiber is really designed as a grab-and-hold cleaning fabric.  When you are facing organics on glass, fingerprints, oils from pollution, or smoke from BBQ's  - add detergent to your MICROFIBER SCRUB to break down the organics.\u003c\/p\u003e\n\u003cp\u003eBy choosing the correct SCRUB, you will reduce the number of AGITATION strokes, thereby increasing your efficiency which translates into an increased HOURLY RATE. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"The Official REACH-iT Store","offers":[{"title":"Default Title","offer_id":55329311752360,"sku":"1-003E-00927","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/7447\/files\/g-force-hand-tool-only.png?v=1788761605"},{"product_id":"g-force-18-hand-tool-only","title":"G-FORCE PRO 18\" HAND TOOL only","description":"\u003cp\u003eG-FORCE is ANOTHER REACH-iT INNOVATION (circa 2024) to revolutionize cleaning glass that is 'ground up'. \u003c\/p\u003e\n\u003cp\u003eThe G-FORCE 18\" HAND TOOL option is ideal if you a) you own G-FORCE PRO KIT, or if you already have a suitable pole with POLE to HANDLE STEM ADAPTOR.  If you don't have an adaptor, but you want to use G-FORCE on your existing pole, just add to your order an aluminum POLE to HANDLE STEM ADAPTOR for your brand pole and then you can add G-FORCE, and any other RADIAL TOOL and Z-FORCE. If you do not have a suitable pole (we recommend an 8FT extended length), choose G-FORCE PRO KIT. \u003c\/p\u003e\n\u003cp\u003eWhilst we designed G-FORCE 14\" for 'ground glass', many window cleaners have adopted it as one of their 'go to' tools up to 3 stories (above that, the GYRO swivel can't be locked, so it gets hard to control).  As a result, we developed the 18\" chassis that you can buy either as an add-on chassis, or as a full alternative hand tool. Of course, all RADIAL TOOL handles are compatible with the RADIAL POLE to HANDLE STEM ADAPTOR. If you are choosing between 18\" and 14\" as your first G-FORCE, choose 14\" as it is very nimble and has more pounds per square inch force (smaller SCRUB area) so your AGITATION is always as effective as possible. \u003c\/p\u003e\n\u003cp\u003eWhy do you benefit from a pole ?  When we clean glass to the ground, whether a store-front, a glass-clad ground floor, or glass balustrades, using a pole is so ergonomically wrong - we become contortionists - crouching, bending over, cleaning sideways etc - it is not good long term!\u003c\/p\u003e\n\u003cp\u003eThe 'G' in G-FORCE stands for 'GYRO' and the GYRO does the 'bending' for you!  You can reach 6FT above your head, to your toes without changing your posture !\u003c\/p\u003e\n\u003cp\u003eCleaning glass balustrades with a mop and squeegee often involves moving your center of gravity over the railing.  Using the 6\" REACH MASTER gooseneck (not included), you can clean the other side of a glass balustrade with an upright stance, all your mass on the balcony side. Using the GYRO, you can easily use G-FORCE 'upside down' so the rinse bars are always at the top.\u003c\/p\u003e\n\u003cp\u003eTalking about the orientation of the rinse jetstreams, there is a case for having them under the tool - when a window is REALLY dirty with dust (eg. farm houses), it is easier to pull the dirty water DOWN rather than pushing it up the window and asking gravity to pull it down - when you are wanting to push the next action up.  By inverting G-FORCE (the benefit of the GYRO), you can do the first pass upside down and get the dirt off in a single downward stroke, then spin it around and next time, rinse bars on the top to make sure the spot-free water is last on the glass. \u003c\/p\u003e\n\u003cp\u003eHave you ever had to clean a glass panel or window with only an inch of space to get your tool in ?  Perfect for G-FORCE.  Whether it is between security rails, or between the glass balustrade that extends to the bottom of a balcony slab (another architectural oversight) - you can slide the swivel base on the chassis of G-FORCE to the full left or right (the same as we do with a squeegee) and slide just the chassis into the space with the handle\/pole fully off-centered.  \u003c\/p\u003e\n\u003cp\u003eEFFICIENCY is a combination of increased speed of AGITATION and ON-GLASS-RINSE (eliminating the secondary rinse phase).  To maximize AGITATION, you need to match the SCRUB pad to the DEBRIS on the glass.  That is why we include 6 different types of SCRUB:  \u003c\/p\u003e\n\u003cp\u003eOrange NON-SCRATCH Scrub is your 'go-to' SCRUB for all on-glass applications. This is most like 'bristles'. \u003c\/p\u003e\n\u003cp\u003eBlack CARBORUNDUM is super sharp - almost like super-fine emery paper.  It will not scratch real glass, but it will definitely scratch up any nano treatment on external glass (so test it before using on tempered glass).\u003c\/p\u003e\n\u003cp\u003eYellow TOMCAT is amazing at Bee Poo, and removing the waxy residue. It is truly amazing and remarkably fast. \u003c\/p\u003e\n\u003cp\u003eGreen HULK has an even higher surface friction  - ideal for stuff like seagull bombardments that so not soften quickly with water.\u003c\/p\u003e\n\u003cp\u003eWhite MAGIC ERAZER is able to remove sticker residue, and silicon creep from the window seals. \u003c\/p\u003e\n\u003cp\u003eGrey MICROFIBER is not really a SCRUB as microfiber is really designed as a grab-and-hold cleaning fabric.  When you are facing organics on glass, fingerprints, oils from pollution, or smoke from BBQ's  - add detergent to your MICROFIBER SCRUB to break down the organics.\u003c\/p\u003e\n\u003cp\u003eBy choosing the correct SCRUB, you will reduce the number of AGITATION strokes, thereby increasing your efficiency which translates into an increased HOURLY RATE. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"The Official REACH-iT Store","offers":[{"title":"Default Title","offer_id":55329609220264,"sku":"1-003A-01036","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/7447\/files\/G-FORCE-18-hand-tool-only.png?v=1788761770"}],"url":"https:\/\/www.futureofcleaning.com\/en-de\/collections\/all-scrub-pad-brushes.oembed","provider":"The Official REACH-iT Store","version":"1.0","type":"link"}