GO POWER and SAVE OVER $500!
At REACH-iT, we understand you have choices when considering your Water Fed Window Cleaning Tools - and we want you to join our amazing line of customers who choose REACH-iT.
As the only manufacturer selling direct to Window Cleaners in North America, we feel we can offer you MORE VALUE by mere fact that we do not have a middle-man. If we pass to you the means to clean FASTER, BETTER, SAFER at the most competitive VALUE, of course, you will choose REACH-iT!
We don't see Reach-iT competing with resellers on price, because 'price' is how they buy - so 'price' is how they sell. We feel very strongly that we are able to offer greater value, by giving you MORE TOOLS and accessories to go with your REACH-iT Pole - ultimately meaning you can clean more windows for more money.
POWER PACK is a complete kit to have you Water Fed Window Cleaning FASTER, BETTER, SAFER - if you are not looking for 'every solution' at this time, then this pack is ideal.
The WARRIOR Water Fed Window Cleaning Pole is based on the design of our COMMERCIAL flagship - Reach-iT PRO - we made it slightly more rigid, and a whole lot more convenient by changing the modulus of a few sections, and changing the length of the tube sections so the clamps are more convenient to facilitate the Operator to clean windows FASTER, BETTER, SAFER!
Our goal is to maximise your efficiency. In seeking to guide you through the decision making process, we want to draw your attention to the fact that you will achieve more time savings and therefore achieve a higher hourly rate by focusing on how to clean FASTER, BETTER, and SAFER on 80% of the windows you clean, rather than you would by focusing on the much smaller percentage of the ‘highest windows’ you plan to clean.
The Reach-iT design is all about the 80:20 RULE:
We ask you ‘What is the height range of windows that account for 80% of the glass you clean?” This is typically 1-2 stories for Residential and 1- 3 or 4 stories for Commercial operators. We then ask “What is the maximum height windows you intend to clean any time in the future?” With the answers to these two questions, we are able to recommend a pole that is DESIGNED for the 80% of the windows you clean, and able to be extended any time in the future to reach the ‘highest windows you want to clean’.
To understand this better, consider that only 25% of the glass of a 4 story building is at 4 stories, 75% is 3 stories and below, 50% is 2 stories and below, and 25% of the windows (ground floor) could be cleaned by hand without a water fed pole!
Remember, you don't need to buy what you don't need today - if you own a WARRIOR, you can reach 65 FEET at anytime in the future.
WARRIOR is designed as a modular three/four story telescopic pole system that can be disassembled to clean lower windows, and extended with PLUS A and PLUS B to clean higher windows.
Standing at just 5ft 8” compact height, and 32.5ft of actual pole length (add 5ft Operator height to get ’37.5ft REACH’), WARRIOR has all the clamps at chest height (starting just 4.5 ft off the base), making it totally convenient to adjust the length of the pole at all times. Adding our new SHOCKSTOP Insulator Handle, adds an additional 5ft to the WARRIOR master.
WARRIOR is a 7-section telescopic pole, pulling apart at sections 1,3 and 5 to give you a shorter, lighter pole when working lower glass. Sections 1-5 give 30ft reach, Sections 1-3 give you 20ft reach, and Section 1 on its own gives you 10ft reach. This is the essential Reach-iT design - a ‘Pole System’ designed specifically for Window Cleaning, pulling apart and extending one story at a time.
'WARRIOR : POWER PACK' is the WARRIOR POLE (click here for the full information on WARRIOR POLE) AND all the following accessories :
You will receive 75ft of RHINO HI-FLO, designed for delivering more water to ALL Reach-iT Brushes
We include our ‘ALL-ROUNDER’ design CONSTRUCTOR BRUSH - especially for Residential Window Cleaning. This is the latest style CONSTRUCTOR with extended bristles for reaching into corners, HYDRO-BLADE, and SIDE 2 SIDE swivel adaptor so you can be FASTER using The Reach-iT TECHNIQUE. designed to clean windows FASTER.
To ensure you are cleaning windows SAFER, we include with WARRIOR, the Insulator Handle ‘SHOCKSTOP’. Added to the base of WARRIOR, this also gives you an additional 5ft extension length, taking WARRIOR to 35ft actual length, or 40ft ‘reach’. Designed to keep you SAFER.
To have the ability to connect SHOCKSTOP to the WARRIOR when using the top part of the pole (WARRIOR pulls apart at section 3, and 5 to make a lighter, faster, shorter pole), simply use CONNECT. If you own PLUS A and PLUS B extensions, you can also CONNECT these together to make a second water fed pole, maximising the use of your extensions, and deferring the need to buy a second 40ft pole in the future. Designed to use your money BETTER.
Ergonomics is a very important aspect of working SAFER - and one of the most important aspects of ergonomics with Water Fed Window Cleaning is the effect on the Carpal Tunnel from a poorly sized SQUEEZE GRIP. GRIP is designed to fit both the #1 section of WARRIOR after you pull it out of the master pole, to clean nose-to-glass; glass fencing; ground floor glass; and glass balustrades. Slide one ‘handle’ up the pole for your top hand, and clip the main handle onto the base of your pole section to make the grip more comfortable and SAFER. You can also use GRIP on your PLUS A with traditional tools with the addition of a ‘Euro to Come Adaptor’!
CHECK-IT is our unique ‘Ultra-Pure Rinse Meter’ that can be fitted to your WARRIOR Pole, just below the CONSTRUCTOR Brush, guaranteeing your Operator can confirm Spot-Free Water is coming through the system at any time. This is particularly powerful when using the DRIVE-THRU CARWASH METHOD where you are using both tap water, and Spot-Free Water through the same Hose and Tube configuration.
These Ergonomic Handles were designed with Dr Douglas J Mills. M.D. from Dallas, TX in 2015. POWER and CONTROL are a powerful tool to use when you are doing large business parks, or glass clad buildings, taking the workload from the Operator’s wrist and elbows, to the shoulder and legs, facilitating a more ergonomic action. Designed to keep you SAFER.
‘Look straight ahead, and see straight UP’ sums up the function of wearing PRISMS when cleaning high windows with Water Fed Poles. Avoid Tension Headaches, and work at the best angles by wearing PRISMS - we know many water fed Operator’s actually step back further from the building to reduce the ‘craning of the neck’, and thereby introduce an inefficiency with the water fed pole. Designed to keep you SAFER.
WARRIOR : ELITE PACK is absolutely everything you will ever need as a Window Cleaner to clean ANY WINDOW, ANY WHERE - with tools dedicated to all types of concretion, excretion or pollution possible with Water Fed Technology.
To see what is in the WARRIOR : ELITE PACK (click here)
Call our USA Team on 562-684-4928 anytime to discuss the right PLUS solution for you at this time. Remember, you don't need to buy what you don't need today - if you own a WARRIOR, you can reach 65 FEET at anytime in the future. You can also start with DI ONLY and upgrade to RO-DI any time in the future.
Add PLUS A to your WARRIOR pole to extend it even further to reach high glass up to 55ft reach. PLUS A is an inverse 2-part telescopic pole that connects between sections 3 and 4 of your WARRIOR master pole. Made from High Modulus Carbonfiber, PLUS A is 6ft 2” compact, and adds 11ft 4” extension to your reach.
Add PLUS AB to your WARRIOR pole to extend it even further to reach high glass up to 65 ft reach. PLUS A is an inverse 2-part telescopic pole that connects between sections 3 and 4 of your WARRIOR master pole. Plus B is an inverse 2-part telescopic pole that connects between sections 5 and 6 of your WARRIOR master pole. Made from Ultra-High Modulus Carbonfiber, PLUS A and PLUS B are 6ft 2” compact, and each adds 11ft 4” extension to your reach.
Add PLUS ABB to your WARRIOR pole to extend it even further to reach high glass up to 75ft reach. PLUS A is an inverse 2-part telescopic pole that connects between sections 3 and 4 of your WARRIOR master pole. Plus B are an inverse 2-part telescopic pole that connect between sections 5 and 6 of your WARRIOR master pole (you can connect two PLUS B one after the other.) Made from High Modulus Carbonfiber, PLUS A and PLUS B are 6ft 2” compact, and each adds 11ft 4” extension to your reach.
DUAL DI TANK is a simple and low-cost Dual-Tank DI System that is ideal for the following conditions : IF YOU ARE:
FLOW: RED EDITION is our latest advancement in Pure Water Filters - especially for use with HYDRO-BLADE WATER SQUEEGEES.
The evolution of RO-DI systems is critical now for users of brushes with more than 4 pencil jets - the maximizing of PRESSURE and FLOW-RATES is critical. This is the focus of FLOW RED.
Purchased 2, 1st impressions upon opening the package was impressive. Many components were included which eliminates the need to purchase more, it had it all. Excited to use the Check IT TDS meter too. Pole is very comfortable in the hands and extends smoothly. Rhino Hi-Flo Tube is durable and came with all connections. We have a forum member testing the 2nd Warrior Power Pack currently.