G-FORCE PRO 18" HAND TOOL only
SKU 1-003A-01036 · 3 options
Los miembros ALTITUDE ahorran hasta 30%
Inicia sesión para ver tu precio. Ver los niveles
Este botón agrega solo la herramienta de mano. ¿Todavía no tienes pértiga? El PRO KIT incluye una.
Cómo limpia G-FORCE
Un nuevo tipo de herramienta, no un cepillo: un chasis con almohadillas de fregado (scrub pads) sobre un cabezal GYRO, con la barra de enjuague (rinse bar) sobre el vidrio.
All Scrub Pad
Cómo friega: Solo almohadilla de fregado, sin cerdas. Todo el contacto se dedica a fregar.
Fregado7 / 10
Caudal de enjuague4 / 10
Más fregado significa menos paso de agua. Nada saca 10 en ambos.
Ideal para: Locales comerciales, plantas bajas con fachada de vidrio, barandales de vidrio y suciedad pesada.
¿Todavía no tienes pértiga? Llévate el G-FORCE PRO KIT, con pértiga de 8 ft / 2.4 m incluida →¿Suciedad adherida o rocío de pintura? Prueba Z-FORCE PRO →
Arma tu equipo G-FORCE. Agrégalo todo de una vez.
Agrega el adaptador de pértiga, el REACH MASTER para barandales y almohadillas de repuesto. Compatibles con esta herramienta y enviados juntos.
PASO 1 - ELIGE TU G-FORCE
Cada opción es un producto distinto. Elige una para cambiar.
PASO 2 - COMPLEMENTOS COMPATIBLES CON G-FORCE
¿En qué pértiga de agua (water-fed pole / WFP) lo vas a montar?
TU EQUIPO
- G-FORCE PRO 18" HAND TOOL only€261,88
1 artículo
La herramienta y cada complemento van al carrito como artículos separados. Envíos a EE. UU. y a todo el mundo, tarifas al pagar.
€261,88
18" / 45.7 cm · 1 artículo
Por qué lo compran los profesionales
- Clean in one pass - patented tool: it scrubs on the up-stroke and rinses on the down-stroke, so there's no going back to rinse.
- The GYRO head does the bending: clean from 6 ft / 1.8 m above your head down to your toes without crouching.
- The 18" / 45.7 cm chassis covers wider glass, up to 3 stories. First G-FORCE? Start with the 14": it's nimbler and presses harder.
- 360º action. Just twist: rinse bar on top so pure water is the last thing on the glass, or underneath to pull heavy dust down in one stroke.
- Slide the swivel base to either end to get the chassis into gaps as tight as 1" / 2.5 cm (security rails, balustrades).
- 6 scrub types in the box: non-scratch, carborundum, TOM CAT, green HULK, magic eraser and microfiber.
Detalles del producto
G-FORCE is ANOTHER REACH-iT INNOVATION (circa 2024) to revolutionize cleaning glass that is 'ground up'.
The G-FORCE 18" HAND TOOL option is ideal if you a) you own G-FORCE PRO KIT, or if you already have a suitable pole with POLE to HANDLE STEM ADAPTOR. If you don't have an adaptor, but you want to use G-FORCE on your existing pole, just add to your order an aluminum POLE to HANDLE STEM ADAPTOR for your brand pole and then you can add G-FORCE, and any other RADIAL TOOL and Z-FORCE. If you do not have a suitable pole (we recommend an 8FT extended length), choose G-FORCE PRO KIT.
Whilst we designed G-FORCE 14" for 'ground glass', many window cleaners have adopted it as one of their 'go to' tools up to 3 stories (above that, the GYRO swivel can't be locked, so it gets hard to control). As a result, we developed the 18" chassis that you can buy either as an add-on chassis, or as a full alternative hand tool. Of course, all RADIAL TOOL handles are compatible with the RADIAL POLE to HANDLE STEM ADAPTOR. If you are choosing between 18" and 14" as your first G-FORCE, choose 14" as it is very nimble and has more pounds per square inch force (smaller SCRUB area) so your AGITATION is always as effective as possible.
Why do you benefit from a pole ? When we clean glass to the ground, whether a store-front, a glass-clad ground floor, or glass balustrades, using a pole is so ergonomically wrong - we become contortionists - crouching, bending over, cleaning sideways etc - it is not good long term!
The 'G' in G-FORCE stands for 'GYRO' and the GYRO does the 'bending' for you! You can reach 6FT above your head, to your toes without changing your posture !
Cleaning glass balustrades with a mop and squeegee often involves moving your center of gravity over the railing. Using the 6" REACH MASTER gooseneck (not included), you can clean the other side of a glass balustrade with an upright stance, all your mass on the balcony side. Using the GYRO, you can easily use G-FORCE 'upside down' so the rinse bars are always at the top.
Talking about the orientation of the rinse jetstreams, there is a case for having them under the tool - when a window is REALLY dirty with dust (eg. farm houses), it is easier to pull the dirty water DOWN rather than pushing it up the window and asking gravity to pull it down - when you are wanting to push the next action up. By inverting G-FORCE (the benefit of the GYRO), you can do the first pass upside down and get the dirt off in a single downward stroke, then spin it around and next time, rinse bars on the top to make sure the spot-free water is last on the glass.
Have you ever had to clean a glass panel or window with only an inch of space to get your tool in ? Perfect for G-FORCE. Whether it is between security rails, or between the glass balustrade that extends to the bottom of a balcony slab (another architectural oversight) - you can slide the swivel base on the chassis of G-FORCE to the full left or right (the same as we do with a squeegee) and slide just the chassis into the space with the handle/pole fully off-centered.
EFFICIENCY is a combination of increased speed of AGITATION and ON-GLASS-RINSE (eliminating the secondary rinse phase). To maximize AGITATION, you need to match the SCRUB pad to the DEBRIS on the glass. That is why we include 6 different types of SCRUB:
Orange NON-SCRATCH Scrub is your 'go-to' SCRUB for all on-glass applications. This is most like 'bristles'.
Black CARBORUNDUM is super sharp - almost like super-fine emery paper. It will not scratch real glass, but it will definitely scratch up any nano treatment on external glass (so test it before using on tempered glass).
Yellow TOMCAT is amazing at Bee Poo, and removing the waxy residue. It is truly amazing and remarkably fast.
Green HULK has an even higher surface friction - ideal for stuff like seagull bombardments that so not soften quickly with water.
White MAGIC ERAZER is able to remove sticker residue, and silicon creep from the window seals.
Grey MICROFIBER is not really a SCRUB as microfiber is really designed as a grab-and-hold cleaning fabric. When you are facing organics on glass, fingerprints, oils from pollution, or smoke from BBQ's - add detergent to your MICROFIBER SCRUB to break down the organics.
By choosing the correct SCRUB, you will reduce the number of AGITATION strokes, thereby increasing your efficiency which translates into an increased HOURLY RATE.
Qué incluye la caja
1 x G-FORCE PRO 18" / 45.7 cm hand tool with handle
9 x 18" scrubs: 3 x CARBORUNDUM (1 fitted), 3 x NON-SCRATCH, 3 x LONG-LOOP BLUE MICROFIBER
1 x G-FORCE TUBERUNNERS pack
1 x tool kit: screwdriver, file, needle, 2 clips
Especificaciones
- Width
- 18" / 45.7 cm
- 2 passes
- cleans a 34" / 86 cm pane
- Construction
- All Scrub Pad chassis on a GYRO head
- Agitation
- 7 / 10
- Rinse flow
- 4 / 10
- Scrubs in the box
- 6 types - non-scratch, carborundum, TOM CAT, green HULK, magic eraser, microfiber
- Tight gaps
- chassis fits a 1" / 2.5 cm gap
- Fits
- Any pole, with the G-FORCE aluminum pole adaptor
- Warranty
- 1-year manufacturer warranty
Envíos y garantía
Envíos a EE. UU. y a todo el mundo, tarifas calculadas al pagar. Garantía del fabricante de 1 año, con soporte profesional real por chat en vivo o correo.
LIMPIA VENTANAS EN UNA SOLA PASADA
Friega al subir. Enjuaga al bajar.
Friega en el movimiento hacia arriba y enjuaga en el movimiento hacia abajo, sin despegar la herramienta del vidrio.
NIVEL DEL CEPILLO
4X MÁS RÁPIDO
Solo almohadilla de fregado, sin cerdas. Todo el contacto se dedica a fregar.
GYRO HEAD
The head does the bending.
Clean from 6 ft / 1.8 m above your head down to your toes, standing upright. No crouching at store-fronts.
Wider glass, fewer strokes
The 18" / 45.7 cm chassis cleans a 34" / 86 cm pane in 2 passes.
34"
/ 86 cm pane in 2 passes
6 SCRUBS
Every type in the box
1"
/ 2.5 cm gaps, rails and balustrades
Se adapta a tu pértiga.
con opción de TUBO INTERNO
El adaptador de aluminio G-FORCE es compatible con todas las marcas de pértigas. Elige la tuya y viene instalado.
BOQUILLAS SIN TAPONES
Filtro en línea antes de las boquillas.
Tu manguera no siempre está conectada al sistema de agua pura. Si la desconectas y cae al suelo, puede entrarle arenilla fina.
Un filtro de malla fina va dentro de la manguera, justo antes de la barra de enjuague (rinse bar). Atrapa esa arenilla para que las boquillas no se tapen. Si se llena, enjuágalo y sigue trabajando.
- ✓ PATENTADO
- ✓ CON GARANTÍA
- ✓ DESDE 2011
- ✓ SOPORTE POR CHAT EN VIVO
Lo que dicen los profesionales
Preguntas
¿Todavía tienes dudas?
Pregúntanos lo que quieras, respondemos por chat en vivo o correo.
¿14" o 18"?
Empieza con el de 14" / 35.6 cm. Es ágil, y el área de fregado más pequeña pone más presión sobre el vidrio, así que cada pasada rinde más. Agrega el de 18" / 45.7 cm para vidrios más anchos: cómpralo como herramienta de mano completa o como chasis adicional que se desliza sobre tu montaje GYRO de 14".
¿Le queda a mi pértiga?
Sí, con el adaptador de aluminio G-FORCE para pértiga. Elige tu pértiga arriba, al armar tu equipo G-FORCE. Una vez instalado, el mismo adaptador también admite nuestros cepillos RADIAL y Z-FORCE. ¿Todavía no tienes pértiga? El G-FORCE PRO KIT incluye una de 8 ft / 2.4 m. ¿Tienes dudas? Escríbenos por chat en vivo o a support@futureofcleaning.com.
¿Puedo usarlo en altura?
Sí, hasta 3 pisos. G-FORCE gira libremente y el giro no se puede bloquear, así que por encima de 3 pisos se vuelve difícil de controlar. Lo diseñamos para vidrio a nivel de suelo, y para ese trabajo 8 ft / 2.4 m extendida es la medida ideal: probamos muchos largos de pértiga.
¿Cómo limpio un barandal de vidrio?
Coloca el cuello de ganso (gooseneck) REACH MASTER pequeño de 60° y alcanza el lado exterior mientras estás de pie y derecho, con todo tu peso del lado del balcón. Usa el GYRO para trabajar con G-FORCE al revés, de modo que la barra de enjuague quede en la parte de arriba del vidrio.
¿Qué almohadilla debo usar?
Elige la almohadilla según la suciedad:
- Antirrayas (naranja): la almohadilla de uso diario para la mayoría de los limpiadores de ventanas, y también segura en la mayoría de los marcos. El grano de óxido de aluminio es muy fino y va sobre fibras suaves, así que no raya el vidrio. Como referencia: la almohadilla de nuez tiene 3.5 en la escala de dureza, el vidrio cerca de 6.5 y el carborundo 9.0.
- Microfibra: atrapa la suciedad. Ideal para la contaminación petroquímica, con un chorrito de detergente que no deje rayas. Puede atrapar arena, así que enjuágala seguido.
- Caucho verde (HULK): atrapa, no raspa, y saca la arena. La opción para la suciedad de abejas y el residuo ceroso que queda debajo.
- Esponja mágica: silicona y residuos de calcomanías. Cuenta con unas pasadas más.
- TOM CAT: una almohadilla de agarre para la suciedad de abejas y el residuo ceroso que queda debajo. Tom Hay, limpiador de ventanas en Perth, Australia, la encontró después de probar un material tras otro. Se come la caca de abeja.
- Carborundo: nuestra almohadilla más agresiva. El carburo de silicio (dureza 9.0) quita del vidrio (dureza cerca de 6.5) la suciedad más difícil. No raya el vidrio real porque el respaldo de espuma cede con la presión y la almohadilla es grande. Úsala solo en vidrio real.
El vidrio tratado (como el E-Glass y los paneles de polímero transparente) puede rayarse con cualquier almohadilla abrasiva. Prueba primero en un área pequeña.
¿Cuánto cuesta el envío?
El envío se calcula al pagar, según el peso y el destino. Enviamos a todo EE. UU. y al resto del mundo.
¿Qué cubre la garantía?
Cada producto REACH-iT incluye una garantía del fabricante de 1 año. Tenemos en stock almohadillas de fregado y repuestos para reemplazar lo gastado, así que tu G-FORCE sigue cortando la suciedad mucho después de eso.
¿Qué tipo de cepillo
es el adecuado para ti?
Más fregado significa menos paso de agua. Elige según la suciedad que más limpias.
Solo cerdas
El más suave. Solo cerdas, el agua pasa libre.VER EL ESTILO
Fregado dual
Cerdas + almohadillas de fregado. Suciedad diaria.VER EL ESTILO
ROCKER con fregado dual
Las almohadillas pivotan para quedar planas sobre el vidrio.VER EL ESTILO
Solo almohadilla de fregado
El más agresivo. Sin cerdas.VER EL ESTILO
Completa tu equipo
-
G-FORCE PRO POLE (only)
La pértiga G-FORCE PRO de 8 ft / 2.4 m, adaptador incluido.€135,02
-
FLOW RED+ con PÉRTIGA / CEPILLO GRATIS
Agua pura (pure water) para un enjuague sin manchas.€1.717,16
-
'RELOAD' Brush Holster
Lleva una segunda herramienta en el trabajo.€80,65







