Tubo RADIAL HI-FLO
SKU 1-007A-00169
Los miembros ALTITUDE ahorran hasta 30%
Inicia sesión para ver tu precio. Ver los niveles
1. Longitud
Longitud
Envíos a EE. UU. y a todo el mundo, tarifas al pagar.
DETALLES
QUÉ INCLUYE EL PAQUETE:
TUBO RADIAL HI-FLO: de 75ft o de 150ft
10:10 PUSHFIT: te permite unir dos tramos cualesquiera de HI-FLO
10 PUSH-FIT a GARDENA MACHO (te da la flexibilidad de conectarte a cualquier conexión con GARDENA HEMBRA)
SEGUROS DE COLLAR: evitan que cualquier PUSH-FIT se abra sin querer.
CUÁNDO USARLO:
¡HI-FLO se puede usar por el suelo a lo largo de 75-150 PIES como una manguera de suministro más práctica, Y por la pértiga de agua (water-fed pole / WFP) hasta la abrazadera #1, o directo a tu cepillo RADIAL!
ESPECIFICACIONES:
RADIAL HI-FLO es un tubo de 10mm (aprox. 3/8") de diámetro exterior.
RECUERDA: cuanto más largo el tubo o la manguera, sin importar el diámetro interior, menos caudal (flow rate) llega al cepillo. Usa siempre el largo práctico más corto y lleva el agua con el diámetro interior práctico más grande. Normalmente, reducir el diámetro interior a lo largo de la distancia conserva mejor el caudal (por ejemplo, usa 150FT (50m) de 5/8" (16mm) y luego 150FT (50m) de 3/8" (10mm) en distancias largas). Nuestro objetivo es 1/2GPM (2LPM) en el CEPILLO RADIAL.
PAQUETE HI-FLO:
Este paquete está diseñado para darte el máximo caudal a través del TUBO HI-FLO hasta tu cepillo RADIAL.
Si eliges 150FT, te damos otro ADAPTADOR PUSH-FIT 10:10 para que cortes el HI-FLO en dos tramos (p. ej. 75/75 o 100/50) y los vuelvas a unir fácilmente cuando necesites más largo. Recuerda volver a conectar y usar los anillos de retención COLLAR LOCK para evitar desconexiones accidentales.
HI-FLO está diseñado para llevar más agua a todos los CEPILLOS RADIAL. Sabemos con certeza que puedes USAR MENOS TIEMPO con más CAUDAL durante la fase de ENJUAGUE SOBRE EL VIDRIO. En general, si aceleras tu trabajo más de lo que aumenta el caudal, en realidad USARÁS MENOS VOLUMEN DE AGUA.
SÍ puedes usar HI-FLO en un carrete.
$137.50
75FT
Preguntas frecuentes
What flow rate does a REACH-iT RADIAL brush need from a pure water system?
RADIAL and ROCKER brushes are designed for "high flow": 1/2 GPM / 1.9 LPM at the brush. RADIAL LITE and RADIAL ULTRA-LITE brushes run on high flow or "low flow": 1/3 GPM / 1.3 LPM. Long hose runs and height reduce flow (about 5 PSI of back-pressure per 10 ft / 3 m of height), which is why REACH-iT pure water systems are built for high output.
What's the difference between REACH-iT RADIAL HOSE, HI-FLO TUBE and RHINO-TUBE?
RADIAL HOSE: 5/8" / 16 mm OD, multi-layer braided hose for long runs from the pure water system, UV resistant, non-kink, high-vis. RADIAL HI-FLO TUBE: 3/8" / 10 mm OD single-wall PU tube, for along the ground and up the pole to RADIAL brushes. RHINO-TUBE: 5/16" / 8 mm OD, very light, for low flow-rate tools.
How do I keep good flow at the brush on long hose runs with REACH-iT hose and tube?
Use the shortest practical length, and the widest practical bore. Over long distances, step down in size: for example 150 ft / 46 m of 5/8" / 16 mm RADIAL HOSE, then 150 ft / 46 m of 3/8" / 10 mm HI-FLO. The target is 1/2 GPM / 1.9 LPM at a RADIAL brush.
What comes in the REACH-iT RADIAL HI-FLO Tube pack?
75 ft / 23 m or 150 ft / 46 m of 3/8" / 10 mm OD HI-FLO tube, a 10:10 pushfit to join two lengths, a HI-FLO pushfit to Gardena male, and collar locks to stop pushfits coming apart. The 150 ft / 45.7 m pack adds a second 10:10 pushfit, so you can cut it into two lengths and rejoin them for long runs. HI-FLO can go on a reel.
Why use REACH-iT HI-FLO tube instead of 5/16" tube?
3/8" / 10 mm HI-FLO gives about double the flow of 5/16" / 8 mm tube in the same set-up. More flow during the on-glass rinse saves time, and because you finish faster you can end up using less water overall. HI-FLO can run along the ground and up the pole to the top clamp or straight to a RADIAL brush.
¿Le queda a mi equipo?
Los detalles de arriba indican los modelos y tamaños con los que funciona esta pieza. ¿No estás seguro? Escríbenos por chat en vivo o a support@futureofcleaning.com con tu pértiga de agua (water-fed pole / WFP), cepillo o sistema y lo revisamos por ti.
¿Cuánto cuesta el envío?
El envío se calcula al pagar, según el peso y el destino. Enviamos a todo EE. UU. y al resto del mundo.
¿Qué cubre la garantía?
Cada producto REACH-iT incluye una garantía del fabricante de 1 año. Tenemos en stock almohadillas de fregado (scrub pads) y repuestos para reemplazar lo gastado, así que tu cepillo sigue cortando la suciedad mucho después de eso.