G-FORCE PRO 14" HAND TOOL only
SKU 1-003E-00927 · 3 options
Les membres ALTITUDE économisent jusqu'à 30%
Connectez-vous pour voir votre prix. Voir les niveaux
Ce bouton ajoute l'outil à main seul. Pas encore de perche ? Le PRO KIT en comprend une.
Comment G-FORCE nettoie
Un nouveau type d'outil, pas une brosse : un châssis à tampons de récurage sur une tête GYRO, avec la barre de rinçage sur la vitre.
All Scrub Pad
Comment elle récure : Tampon seul, sans soies. Tout le contact sert à récurer.
Récurage7 / 10
Débit de rinçage4 / 10
Plus de récurage, c'est moins de débit à travers la brosse. Aucune n'obtient 10 sur les deux.
Idéal pour : Vitrines, rez-de-chaussée vitrés, balustrades en verre et forte salissure.
Pas encore de perche ? Prenez le KIT G-FORCE PRO, perche de 8 ft / 2,4 m incluse →Salissures tenaces ou projections ? Essayez Z-FORCE PRO →
Composez votre installation G-FORCE. Ajoutez tout d'un coup.
Ajoutez l'adaptateur de perche, le REACH MASTER pour balustrades et des tampons de rechange. Adaptés à cet outil, expédiés ensemble.
ÉTAPE 1 - CHOISISSEZ VOTRE G-FORCE
Chaque option est un produit à part. Choisissez-en une pour changer.
ÉTAPE 2 - ACCESSOIRES COMPATIBLES AVEC G-FORCE
Sur quelle perche allez-vous la monter ?
VOTRE ENSEMBLE
- G-FORCE PRO 14" HAND TOOL only€226,54
1 ligne d'article
L'outil et chaque accessoire arrivent dans le panier sous forme de lignes séparées. Expédition vers les États-Unis et le monde entier, tarifs à la caisse.
€226,54
14" / 35.6 cm · 1 ligne d'article
Pourquoi les pros l'achètent
- Clean in one pass - patented tool: it scrubs on the up-stroke and rinses on the down-stroke, so there's no going back to rinse.
- The GYRO head does the bending: clean from 6 ft / 1.8 m above your head down to your toes without crouching.
- 360º action. Just twist: rinse bar on top so pure water is the last thing on the glass, or underneath to pull heavy dust down in one stroke.
- Slide the swivel base to either end to get the chassis into gaps as tight as 1" / 2.5 cm (security rails, balustrades).
- 6 scrub types in the box: non-scratch, carborundum, TOM CAT, green HULK, magic eraser and microfiber.
Détails du produit
G-FORCE is ANOTHER REACH-iT INNOVATION (circa 2024) to revolutionize cleaning glass that is 'ground up'.
The G-FORCE HAND TOOL option is ideal if you a) you only want a hand tool, or if you already have a suitable pole. Just add to your order an aluminum POLE to HANDLE STEM ADAPTOR for your brand pole and then you can add G-FORCE, and any other RADIAL TOOL and Z-FORCE. If you do not have a suitable pole (we recommend an 8FT extended length), choose G-FORCE PRO KIT.
Why do you benefit from a pole ? When we clean glass to the ground, whether a store-front, a glass-clad ground floor, or glass balustrades, using a pole is so ergonomically wrong - we become contortionists - crouching, bending over, cleaning sideways etc - it is not good long term!
The 'G' in G-FORCE stands for 'GYRO' and the GYRO does the 'bending' for you! You can reach 6FT above your head, to your toes without changing your posture !
Cleaning glass balustrades with a mop and squeegee often involves moving your center of gravity over the railing. Using the 6" REACH MASTER gooseneck (not included), you can clean the other side of a glass balustrade with an upright stance, all your mass on the balcony side. Using the GYRO, you can easily use G-FORCE 'upside down' so the rinse bars are always at the top.
Talking about the orientation of the rinse jetstreams, there is a case for having them under the tool - when a window is REALLY dirty with dust (eg. farm houses), it is easier to pull the dirty water DOWN rather than pushing it up the window and asking gravity to pull it down - when you are wanting to push the next action up. By inverting G-FORCE (the benefit of the GYRO), you can do the first pass upside down and get the dirt off in a single downward stroke, then spin it around and next time, rinse bars on the top to make sure the spot-free water is last on the glass.
Have you ever had to clean a glass panel or window with only an inch of space to get your tool in ? Perfect for G-FORCE. Whether it is between security rails, or between the glass balustrade that extends to the bottom of a balcony slab (another architectural oversight) - you can slide the swivel base on the chassis of G-FORCE to the full left or right (the same as we do with a squeegee) and slide just the chassis into the space with the handle/pole fully off-centered.
Whilst we designed G-FORCE for 'ground glass', many window cleaners have adopted it as one of their 'go to' tools up to 3 stories (above that, the GYRO swivel can't be locked, so it gets hard to control). As a result, we developed the 18" chassis that you can buy as an add-on chassis, or as a full alternative hand tool. Of course, all handles are compatible with the RADIAL POLE to HANDLE STEM ADAPTOR.
EFFICIENCY is a combination of increased speed of AGITATION and ON-GLASS-RINSE (eliminating the secondary rinse phase). To maximize AGITATION, you need to match the SCRUB pad to the DEBRIS on the glass. That is why we include 6 different types of SCRUB:
Orange NON-SCRATCH Scrub is your 'go-to' SCRUB for all on-glass applications. This is most like 'bristles'.
Black CARBORUNDUM is super sharp - almost like super-fine emery paper. It will not scratch real glass, but it will definitely scratch up any nano treatment on external glass (so test it before using on tempered glass).
Yellow TOMCAT is amazing at Bee Poo, and removing the waxy residue. It is truly amazing and remarkably fast.
Green HULK has an even higher surface friction - ideal for stuff like seagull bombardments that so not soften quickly with water.
White MAGIC ERAZER is able to remove sticker residue, and silicon creep from the window seals.
Grey MICROFIBER is not really a SCRUB as microfiber is really designed as a grab-and-hold cleaning fabric. When you are facing organics on glass, fingerprints, oils from pollution, or smoke from BBQ's - add detergent to your MICROFIBER SCRUB to break down the organics.
By choosing the correct SCRUB, you will reduce the number of AGITATION strokes, thereby increasing your efficiency which translates into an increased HOURLY RATE.
Contenu de la boîte
1 x G-FORCE PRO 14" / 35.6 cm hand tool with handle
9 x 14" scrubs: 3 x CARBORUNDUM (1 fitted), 3 x NON-SCRATCH, 3 x LONG-LOOP BLUE MICROFIBER
1 x G-FORCE TUBERUNNERS pack
1 x tool kit: screwdriver, file, needle, 2 clips
Caractéristiques
- Width
- 14" / 35.6 cm
- 2 passes
- cleans a 26" / 66 cm pane
- Construction
- All Scrub Pad chassis on a GYRO head
- Agitation
- 7 / 10
- Rinse flow
- 4 / 10
- Scrubs in the box
- 6 types - non-scratch, carborundum, TOM CAT, green HULK, magic eraser, microfiber
- Tight gaps
- chassis fits a 1" / 2.5 cm gap
- Fits
- Any pole, with the G-FORCE aluminum pole adaptor
- Warranty
- 1-year manufacturer warranty
Livraison et garantie
Expédition vers les États-Unis et le monde entier, tarifs calculés à la commande. Garantie fabricant de 1 an, avec un vrai support de professionnels par chat en direct ou par e-mail.
NETTOYEZ LES VITRES EN UN SEUL PASSAGE
Récurez en montant. Rincez en descendant.
Récurez à la montée, rincez à la descente, sans décoller l'outil de la vitre.
NIVEAU DE BROSSE
4X PLUS RAPIDE
Tampon seul, sans soies. Tout le contact sert à récurer.
GYRO HEAD
The head does the bending.
Clean from 6 ft / 1.8 m above your head down to your toes, standing upright. No crouching at store-fronts.
360º action. Just twist.
Rinse bar on top so pure water is the last thing on the glass, or underneath to pull heavy dust down in one stroke.
6 SCRUBS
Every type in the box
1"
/ 2.5 cm gaps, rails and balustrades
3 STORIES
Max recommended height
Compatible avec votre perche.
avec option TUYAU INTÉRIEUR
L'adaptateur en aluminium G-FORCE s'adapte à toutes les marques de perche. Choisissez la vôtre et il est livré monté.
PAS DE JETS BOUCHÉS
Filtre en ligne avant les jets.
Votre tube n'est pas toujours branché au système d'eau pure. Débranchez-le, laissez-le tomber au sol, et de fines particules peuvent s'y introduire.
Un filtre à maille fine est placé dans le tube, juste avant la barre de rinçage (rinse bar). Il retient ces particules pour que vos jets ne se bouchent pas. S'il se remplit, rincez-le et continuez à travailler.
- ✓ BREVETÉ
- ✓ GARANTIE INCLUSE
- ✓ DEPUIS 2011
- ✓ ASSISTANCE PAR CHAT EN DIRECT
Ce que disent les pros
Questions
Toujours pas sûr ?
Posez-nous toutes vos questions, nous répondons par chat en direct ou par e-mail.
14" ou 18" ?
Commencez avec le 14" / 35,6 cm. Il est maniable, et la plus petite surface de récurage met plus de pression sur la vitre, donc chaque passe travaille plus fort. Ajoutez le 18" / 45,7 cm pour les vitres plus larges : achetez-le comme outil à main complet, ou comme châssis supplémentaire qui se glisse sur votre fixation GYRO 14".
Est-elle compatible avec ma perche ?
Oui, avec l'adaptateur de perche en aluminium G-FORCE. Choisissez votre perche dans Composez votre ensemble G-FORCE ci-dessus. Une fois monté, le même adaptateur accepte aussi nos brosses RADIAL et Z-FORCE. Pas encore de perche ? Le G-FORCE PRO KIT comprend une perche de 8 ft / 2,4 m. Pas sûr ? Écrivez-nous par chat en direct ou à support@futureofcleaning.com.
Puis-je l'utiliser en hauteur ?
Oui, jusqu'à 3 niveaux. G-FORCE pivote librement et le pivot ne peut pas être verrouillé, donc au-delà de 3 niveaux il devient difficile à contrôler. Nous l'avons conçu pour les vitres au niveau du sol, et pour ce travail 8 ft / 2,4 m déployée est la longueur idéale : nous avons testé de nombreuses longueurs de perche.
Comment nettoyer une balustrade en verre ?
Montez le col de cygne REACH MASTER Petit 60° et passez de l'autre côté en restant debout, tout votre poids côté balcon. Utilisez le GYRO pour faire travailler G-FORCE à l'envers, afin que la barre de rinçage reste en haut de la vitre.
Quel tampon utiliser ?
Adaptez le tampon à la saleté :
- Anti-rayures (orange) : le tampon de tous les jours pour la plupart des laveurs de vitres, et sans danger pour la plupart des châssis aussi. Le grain d'oxyde d'aluminium est très fin et pris dans des fibres souples, il ne rayera donc pas le verre. À titre de repère : le tampon noix a une dureté de 3,5 sur l'échelle de dureté, le verre environ 6,5, le carborundum 9,0.
- Microfibre : accroche la saleté. Idéal contre la pollution pétrochimique, avec un jet de détergent sans traces. Il peut piéger du sable, rincez-le donc souvent.
- Caoutchouc vert (HULK) : il accroche, il ne gratte pas, et il évacue le sable. Le bon choix pour les déjections d'abeilles et le résidu cireux dessous.
- Gomme magique : résidus de silicone et d'autocollants. Prévoyez quelques passages de plus.
- TOM CAT : un tampon de type accroche pour les déjections d'abeilles et le résidu cireux dessous. Tom Hay, laveur de vitres à Perth, en Australie, l'a trouvé après avoir testé matériau après matériau. Il vient à bout des déjections d'abeilles.
- Carborundum : notre tampon le plus agressif. Le carbure de silicium (dureté 9,0) enlève les salissures tenaces du verre (dureté environ 6,5). Il ne rayera pas le vrai verre, car le support en mousse cède sous la pression et le tampon est grand. À utiliser uniquement sur du vrai verre.
Le verre traité (comme le E-Glass et les panneaux en polymère transparent) peut être rayé par n'importe quel tampon abrasif. Testez d'abord sur une petite zone.
Combien coûte l'expédition ?
L'expédition est calculée à la caisse selon le poids et la destination. Nous expédions dans tous les États-Unis et dans le monde entier.
Que couvre la garantie ?
Chaque produit REACH-iT est couvert par une garantie fabricant de 1 an. Les tampons usés et les pièces détachées sont en stock, vous pouvez donc garder G-FORCE efficace bien après cela.
Quel style de brosse
vous convient ?
Plus de récurage signifie moins de débit à travers la brosse. Choisissez selon la saleté que vous nettoyez le plus souvent.
Soies uniquement
La plus douce. Soies pures, le débit passe à travers.VOIR LE MODÈLE
Double agitation
Soies + tampons de récurage. Saleté courante.VOIR LE MODÈLE
ROCKER double agitation
Les tampons pivotent pour rester à plat sur la vitre.VOIR LE MODÈLE
Tampons uniquement
La plus agressive. Sans soies.VOIR LE MODÈLE
Complétez votre équipement
-
G-FORCE PRO POLE (only)
La perche G-FORCE PRO de 8 ft / 2,4 m, adaptateur inclus.€135,56
-
FLOW RED+ avec PERCHE / BROSSE OFFERTES
De l'eau pure pour un rinçage sans traces.€1.724,08
-
'RELOAD' Brush Holster
Emportez un second outil sur le chantier.€80,97







