✅ G-FORCE 14" PRO KIT

G-FORCE is ANOTHER REACH-iT INNOVATION (circa 2024) to revolutionize cleaning glass that is 'ground up'. 

When we clean glass to the ground, whether a store-front, a glass-clad ground floor, or glass balustrades, using a pole is so ergonomically wrong - we become contortionists - crouching, bending over, cleaning sideways etc - it is not good long term!

The 'G' in G-FORCE stands for 'GYRO' and the GYRO does the 'bending' for you!  You can reach 6FT above your head, to your toes without changing your posture !

G-FORCE PRO Kit comes with an 8FT (extended) carbonfiber pole that has a KEVLAR handle that insulates against getting hot in direct sunlight and offers protection against the risk of electrocution.  We tested many lengths of pole and 8FT is 'the sweet spot'.  As 8FT is also an ideal TRAD POLE, we include our adaptor for the UNGER ERGOTEK pole tip for squeegees and mops. 

Cleaning glass balustrades with a mop and squeegee often involves moving your center of gravity over the railing.  Using the 6" REACH MASTER gooseneck (not included), you can clean the other side of a glass balustrade with an upright stance, all your mass on the balcony side. Using the GYRO, you can easily use G-FORCE 'upside down' so the rinse bars are always at the top.

Talking about the orientation of the rinse jetstreams, there is a case for having them under the tool - when a window is REALLY dirty with dust (eg. farm houses), it is easier to pull the dirty water DOWN rather than pushing it up the window and asking gravity to pull it down - when you are wanting to push the next action up.  By inverting G-FORCE (the benefit of the GYRO), you can do the first pass upside down and get the dirt off in a single downward stroke, then spin it around and next time, rinse bars on the top to make sure the spot-free water is last on the glass. 

Have you ever had to clean a glass panel or window with only an inch of space to get your tool in ?  Perfect for G-FORCE.  Whether it is between security rails, or between the glass balustrade that extends to the bottom of a balcony slab (another architectural oversight) - you can slide the swivel base on the chassis of G-FORCE to the full left or right (the same as we do with a squeegee) and slide just the chassis into the space with the handle/pole fully off-centered.  

Whilst we designed G-FORCE for 'ground glass', many window cleaners have adopted it as one of their 'go to' tools up to 4 stories.  As a result, we developed the 18" chassis that you can buy as an add-on chassis, or as a full alternative hand tool. Of course, all handles are compatible with the RADIAL POLE to HANDLE STEM ADAPTOR.

EFFICIENCY is a combination of increased speed of AGITATION and ON-GLASS-RINSE (eliminating the secondary rinse phase).  To maximize AGITATION, you need to match the SCRUB pad to the DEBRIS on the glass.  That is why we include 6 different types of SCRUB:  

Orange NON-SCRATCH Scrub is your 'go-to' SCRUB for all on-glass applications. This is most like 'bristles'. 

Black CARBORUNDUM is super sharp - almost like super-fine emery paper.  It will not scratch real glass, but it will definitely scratch up any nano treatment on external glass (so test it before using on tempered glass).

Yellow TOMCAT is amazing at Bee Poo, and removing the waxy residue. It is truly amazing and remarkably fast. 

Green HULK has an even higher surface friction  - ideal for stuff like seagull bombardments that so not soften quickly with water.

White MAGIC ERAZER is able to remove sticker residue, and silicon creep from the window seals. 

Grey MICROFIBER is not really a SCRUB as microfiber is really designed as a grab-and-hold cleaning fabric.  When you are facing organics on glass, fingerprints, oils from pollution, or smoke from BBQ's  - add detergent to your MICROFIBER SCRUB to break down the organics.

By choosing the correct SCRUB, you will reduce the number of AGITATION strokes, thereby increasing your efficiency which translates into an increased HOURLY RATE. 

Also available is G-FORCE solely as a hand-tool.  If you already own a suitable pole, just add to your order an aluminum POLE to HANDLE STEM ADAPTOR for your brand pole and then you can add G-FORCE, and any other RADIAL TOOL and Z-FORCE.