G-FORCE PRO 18" HAND TOOL only
SKU 1-003A-01036 · 3 options
ALTITUDE-leden besparen tot 30%
Log in om uw prijs te zien. Bekijk de niveaus
Deze knop voegt alleen het handgereedschap toe. Nog geen steel? De PRO KIT wordt met een steel geleverd.
Zo reinigt G-FORCE
Een nieuw soort gereedschap, geen borstel: een chassis met schuurpads (scrub pads) op een GYRO-kop, met de spoelbalk (rinse bar) op het glas.
All Scrub Pad
Zo schrobt hij: Alleen schuurpad, geen borstelharen. Al het contact gaat naar het schrobben.
Schrobkracht7 / 10
Spoeldebiet4 / 10
Meer schuurkracht betekent minder doorstroming. Niets scoort op beide een 10.
Beste voor: Winkelpuien, volledig beglaasde begane gronden, glazen balustrades en zware vervuiling.
Nog geen steel? Neem de G-FORCE PRO KIT, inclusief steel van 8 ft / 2,4 m →Vastgehecht vuil of overspray? Probeer Z-FORCE PRO →
Stel uw G-FORCE-uitrusting samen. Voeg alles in één keer toe.
Voeg de steeladapter, de REACH MASTER voor balustrades en reservepads toe. Afgestemd op dit gereedschap en samen verzonden.
STAP 1 - KIES UW G-FORCE
Elke optie is een apart product. Kies er één om te wisselen.
STAP 2 - ACCESSOIRES VOOR G-FORCE
Op welke steel monteert u dit?
UW SET-UP
- G-FORCE PRO 18" HAND TOOL only$317.90
1 artikelregel
Het gereedschap en elke toevoeging komen als aparte regels in de winkelwagen. Verzending naar de VS en wereldwijd, tarieven bij het afrekenen.
$317.90
18" / 45.7 cm · 1 artikelregel
Waarom professionals hem kopen
- Clean in one pass - patented tool: it scrubs on the up-stroke and rinses on the down-stroke, so there's no going back to rinse.
- The GYRO head does the bending: clean from 6 ft / 1.8 m above your head down to your toes without crouching.
- The 18" / 45.7 cm chassis covers wider glass, up to 3 stories. First G-FORCE? Start with the 14": it's nimbler and presses harder.
- 360º action. Just twist: rinse bar on top so pure water is the last thing on the glass, or underneath to pull heavy dust down in one stroke.
- Slide the swivel base to either end to get the chassis into gaps as tight as 1" / 2.5 cm (security rails, balustrades).
- 6 scrub types in the box: non-scratch, carborundum, TOM CAT, green HULK, magic eraser and microfiber.
Productdetails
G-FORCE is ANOTHER REACH-iT INNOVATION (circa 2024) to revolutionize cleaning glass that is 'ground up'.
The G-FORCE 18" HAND TOOL option is ideal if you a) you own G-FORCE PRO KIT, or if you already have a suitable pole with POLE to HANDLE STEM ADAPTOR. If you don't have an adaptor, but you want to use G-FORCE on your existing pole, just add to your order an aluminum POLE to HANDLE STEM ADAPTOR for your brand pole and then you can add G-FORCE, and any other RADIAL TOOL and Z-FORCE. If you do not have a suitable pole (we recommend an 8FT extended length), choose G-FORCE PRO KIT.
Whilst we designed G-FORCE 14" for 'ground glass', many window cleaners have adopted it as one of their 'go to' tools up to 3 stories (above that, the GYRO swivel can't be locked, so it gets hard to control). As a result, we developed the 18" chassis that you can buy either as an add-on chassis, or as a full alternative hand tool. Of course, all RADIAL TOOL handles are compatible with the RADIAL POLE to HANDLE STEM ADAPTOR. If you are choosing between 18" and 14" as your first G-FORCE, choose 14" as it is very nimble and has more pounds per square inch force (smaller SCRUB area) so your AGITATION is always as effective as possible.
Why do you benefit from a pole ? When we clean glass to the ground, whether a store-front, a glass-clad ground floor, or glass balustrades, using a pole is so ergonomically wrong - we become contortionists - crouching, bending over, cleaning sideways etc - it is not good long term!
The 'G' in G-FORCE stands for 'GYRO' and the GYRO does the 'bending' for you! You can reach 6FT above your head, to your toes without changing your posture !
Cleaning glass balustrades with a mop and squeegee often involves moving your center of gravity over the railing. Using the 6" REACH MASTER gooseneck (not included), you can clean the other side of a glass balustrade with an upright stance, all your mass on the balcony side. Using the GYRO, you can easily use G-FORCE 'upside down' so the rinse bars are always at the top.
Talking about the orientation of the rinse jetstreams, there is a case for having them under the tool - when a window is REALLY dirty with dust (eg. farm houses), it is easier to pull the dirty water DOWN rather than pushing it up the window and asking gravity to pull it down - when you are wanting to push the next action up. By inverting G-FORCE (the benefit of the GYRO), you can do the first pass upside down and get the dirt off in a single downward stroke, then spin it around and next time, rinse bars on the top to make sure the spot-free water is last on the glass.
Have you ever had to clean a glass panel or window with only an inch of space to get your tool in ? Perfect for G-FORCE. Whether it is between security rails, or between the glass balustrade that extends to the bottom of a balcony slab (another architectural oversight) - you can slide the swivel base on the chassis of G-FORCE to the full left or right (the same as we do with a squeegee) and slide just the chassis into the space with the handle/pole fully off-centered.
EFFICIENCY is a combination of increased speed of AGITATION and ON-GLASS-RINSE (eliminating the secondary rinse phase). To maximize AGITATION, you need to match the SCRUB pad to the DEBRIS on the glass. That is why we include 6 different types of SCRUB:
Orange NON-SCRATCH Scrub is your 'go-to' SCRUB for all on-glass applications. This is most like 'bristles'.
Black CARBORUNDUM is super sharp - almost like super-fine emery paper. It will not scratch real glass, but it will definitely scratch up any nano treatment on external glass (so test it before using on tempered glass).
Yellow TOMCAT is amazing at Bee Poo, and removing the waxy residue. It is truly amazing and remarkably fast.
Green HULK has an even higher surface friction - ideal for stuff like seagull bombardments that so not soften quickly with water.
White MAGIC ERAZER is able to remove sticker residue, and silicon creep from the window seals.
Grey MICROFIBER is not really a SCRUB as microfiber is really designed as a grab-and-hold cleaning fabric. When you are facing organics on glass, fingerprints, oils from pollution, or smoke from BBQ's - add detergent to your MICROFIBER SCRUB to break down the organics.
By choosing the correct SCRUB, you will reduce the number of AGITATION strokes, thereby increasing your efficiency which translates into an increased HOURLY RATE.
Wat zit er in de doos
1 x G-FORCE PRO 18" / 45.7 cm hand tool with handle
9 x 18" scrubs: 3 x CARBORUNDUM (1 fitted), 3 x NON-SCRATCH, 3 x LONG-LOOP BLUE MICROFIBER
1 x G-FORCE TUBERUNNERS pack
1 x tool kit: screwdriver, file, needle, 2 clips
Specificaties
- Width
- 18" / 45.7 cm
- 2 passes
- cleans a 34" / 86 cm pane
- Construction
- All Scrub Pad chassis on a GYRO head
- Agitation
- 7 / 10
- Rinse flow
- 4 / 10
- Scrubs in the box
- 6 types - non-scratch, carborundum, TOM CAT, green HULK, magic eraser, microfiber
- Tight gaps
- chassis fits a 1" / 2.5 cm gap
- Fits
- Any pole, with the G-FORCE aluminum pole adaptor
- Warranty
- 1-year manufacturer warranty
Verzending en garantie
Verzending naar de VS en wereldwijd, tarieven worden berekend bij het afrekenen. 1 jaar fabrieksgarantie, met echte ondersteuning van vakmensen via livechat of e-mail.
REINIG UW RAMEN IN ÉÉN BEWEGING
Omhoog schrobben. Omlaag spoelen.
Schrob bij de opwaartse slag en spoel bij de neerwaartse slag, zonder het gereedschap van het glas te halen.
BORSTELNIVEAU
4X SNELLER
Alleen schuurpad, geen borstelharen. Al het contact gaat naar het schrobben.
GYRO HEAD
The head does the bending.
Clean from 6 ft / 1.8 m above your head down to your toes, standing upright. No crouching at store-fronts.
Wider glass, fewer strokes
The 18" / 45.7 cm chassis cleans a 34" / 86 cm pane in 2 passes.
34"
/ 86 cm pane in 2 passes
6 SCRUBS
Every type in the box
1"
/ 2.5 cm gaps, rails and balustrades
Past op uw steel.
met INTERNE SLANG-optie
De aluminium G-FORCE adapter past op elk steelmerk. Kies het uwe en hij wordt gemonteerd geleverd.
GEEN VERSTOPTE SPUITMONDEN
Inline filter vóór de spuitmonden.
Uw buis zit niet altijd aangesloten op het zuiverwatersysteem. Koppelt u hem los en valt hij op de grond, dan kan er fijn gruis in komen.
Een fijnmazig filter zit in de buis, vlak voor de spoelbalk (rinse bar). Het vangt dat gruis op, zodat uw spuitmonden niet verstoppen. Zit het vol, spoel het dan schoon en werk verder.
- ✓ GEPATENTEERD
- ✓ MET GARANTIE
- ✓ SINDS 2011
- ✓ ONDERSTEUNING VIA LIVECHAT
Wat professionals zeggen
Questions
Nog steeds niet zeker?
Stel ons al uw vragen, wij antwoorden via livechat of e-mail.
14" of 18"?
Begin met de 14" / 35,6 cm. Die is wendbaar en het kleinere schuurvlak geeft meer druk op het glas, dus elke slag werkt harder. Voeg de 18" / 45,7 cm toe voor breder glas: koop hem als compleet handgereedschap, of als extra chassis dat op uw 14" GYRO-houder schuift.
Past hij op mijn steel?
Ja, met de aluminium G-FORCE steeladapter. Kies uw steel bij Stel uw G-FORCE set samen hierboven. Eenmaal gemonteerd past dezelfde adapter ook op onze RADIAL borstels en Z-FORCE. Nog geen steel? De G-FORCE PRO KIT wordt geleverd met een steel van 8 ft / 2,4 m. Niet zeker? Stuur ons een bericht via de livechat of naar support@futureofcleaning.com.
Kan ik hem op hoogte gebruiken?
Ja, tot 3 bouwlagen. G-FORCE draait vrij en het draaipunt kan niet worden vergrendeld, dus boven 3 bouwlagen wordt hij moeilijk te beheersen. We hebben hem ontworpen voor glas op de begane grond, en voor dat werk is 8 ft / 2,4 m uitgeschoven de ideale lengte: we hebben veel steellengtes getest.
Hoe reinig ik een glazen balustrade?
Monteer de Klein 60° REACH MASTER zwanenhals (gooseneck) en reik over naar de buitenkant terwijl u rechtop staat, met al uw gewicht aan de balkonzijde. Gebruik de GYRO om G-FORCE ondersteboven te laten werken, zodat de spoelbalk (rinse bar) bovenaan het glas blijft.
Welk schuurpad moet ik gebruiken?
Stem het schuurpad (scrub pad) af op het vuil:
- Krasvrij (oranje): het schuurpad voor elke dag voor de meeste glazenwassers, en ook veilig op de meeste kozijnen. De aluminiumoxidekorrel is zeer fijn en zit in zachte vezels, dus het krast glas niet. Ter vergelijking: een walnootpad heeft hardheid 3,5 op de hardheidsschaal, glas ongeveer 6,5, carborundum 9,0.
- Microvezel: pakt vuil vast. Het beste bij petrochemische vervuiling, met een scheutje streepvrij reinigingsmiddel. Het kan zand vasthouden, dus spoel het vaak uit.
- Groen rubber (HULK): een grijper, geen schraper (scraper), en het spoelt zand weg. De keuze voor bijenuitwerpselen en de wasachtige laag eronder.
- Wonderspons: resten van siliconen en stickers. Reken op een paar extra slagen.
- TOM CAT: een grijpend schuurpad voor bijenuitwerpselen en de wasachtige laag eronder. Tom Hay, een glazenwasser in Perth, Australië, vond het na materiaal op materiaal te hebben getest. Het maakt korte metten met bijenpoep.
- Carborundum: ons agressiefste pad. Siliciumcarbide (hardheid 9,0) snijdt hardnekkig vuil van glas (hardheid ongeveer 6,5). Het krast echt glas niet, omdat de schuimlaag onder druk meegeeft en het pad groot is. Alleen op echt glas gebruiken.
Behandeld glas (zoals E-Glass en heldere polymeerpanelen) kan krassen door elk schurend pad. Test eerst een klein stukje.
Wat kost de verzending?
De verzendkosten worden bij het afrekenen berekend op basis van gewicht en bestemming. Wij verzenden door de hele VS en wereldwijd.
Wat valt onder de garantie?
Elk REACH-iT product heeft 1 jaar fabrieksgarantie. Versleten schuurpads en reserveonderdelen zijn op voorraad, dus u houdt G-FORCE nog lang daarna scherp aan het werk.
Welk type borstel
past bij u?
Meer schrobben betekent minder doorstroming. Kies op basis van het vuil dat u het vaakst reinigt.
Alleen borstelharen
Zachtst. Pure borstelharen, doorstroming.BEKIJK DEZE STIJL
Dubbele schrobwerking
Borstelharen + schuurpads. Dagelijks vuil.BEKIJK DEZE STIJL
ROCKER dubbele schrobwerking
Pads kantelen mee om vlak op het glas te blijven.BEKIJK DEZE STIJL
Alleen schuurpad
Meest agressief. Geen borstelharen.BEKIJK DEZE STIJL
Maak uw uitrusting compleet
-
G-FORCE PRO POLE (only)
De G-FORCE PRO steel van 8 ft / 2,4 m, adapter inbegrepen.$163.90
-
FLOW RED+ met GRATIS STEEL / BORSTEL
Zuiver water voor een vlekvrije spoeling.$2,084.50
-
'RELOAD' Brush Holster
Neem een tweede gereedschap mee op de klus.$97.90







