SCRUBS /SCRUBBIES : for ULTRA-LITE, G-FORCE, E-FORCE and FRENCH PANE BRUSHES

G-FORCE scrubs come in 14" / 35.6 cm and 18" / 45.7 cm. Packs of 9: TOM CAT, carborundum, non-scratch, standard microfiber. Packs of 4: green rubber (HULK) and magic eraser. A G-FORCE SCRUBS HOLSTER is also sold on the same product page. The E-FORCE "Step 1: clean microfiber" scrub (pack of 9, 14") also fits the G-FORCE.

Order the scrub size that matches your brush: 14" / 35.6 cm, 18" / 45.7 cm or 22" / 55.9 cm (MAX). Each size comes in TOM CAT (pack of 9), carborundum, non-scratch and magic eraser (packs of 10). Choose ULTRA-LITE and your size on the scrubs product page.

The FRENCH PANE brushes are mini ULTRA-LITES, so they take small "scrubbies" in 6" / 15.2 cm or 8" / 20.3 cm. They come in packs of 20 in carborundum, non-scratch and magic eraser. The small surface puts more pressure on the glass with every stroke.

Step 1: a long-loop microfiber grabs the dirt, used with a fine mist of water (or a water and isopropyl mix) so it slides over the coating. Step 2: a polishing microfiber, used dry, clears the thin film of dirt Step 1 leaves behind, which otherwise shows at sunrise and sunset. That's why the E-FORCE box has 2 units: one for each step.

Yes, in 14" / 35.6 cm packs of 9. Step 1: clean microfiber (also fits the G-FORCE). Step 2: polish microfiber (E-FORCE only). Use only these soft microfibers on Low-E coated glass: no abrasive scrubs, blades or squeegees on the coated side.

Pick your tool and size at the top. Only the scrubs that fit that brush show, and the green tick confirms the fit. REACH-iT has two scrub ranges: one for RADIAL ROCKER, SOLAR ROCKER and DEEP-FRAME ROCKER, and one for ULTRA-LITE, G-FORCE, E-FORCE and FRENCH PANE. Not sure? Message us on live chat or email support@futureofcleaning.com.

Match the scrub to the dirt:

• Non-scratch (orange): the everyday scrub for most window cleaners, and safe on most frames too. The aluminum oxide grit is very fine and set in soft fibers, so it won't scratch glass. For scale: walnut scrub is 3.5 on the hardness scale, glass about 6.5, carborundum 9.0.
• Stainless steel wool / bronze wool: aggressive scrape for very dirty glass. The strands run parallel to the glass and act like blades. They don't rust, so they won't stain.
• Stainless mesh ("the cheesegrater"): scrapes caked-on dirt, artillery fungus, paint overspray and sticker residue.
• Blue metal: sharper than stainless mesh. Very aggressive.
• Microfiber: grabs dirt. Best for petrochemical pollution, with a squirt of non-streaking detergent. It can trap sand, so rinse it often.
• Green rubber: a grabber, not a scraper, and it flushes sand out. The pick for bee mess and the waxy residue under it.
• Magic eraser: silicone and sticker residue. Expect a few more passes.
• Silicon: an everyday grab scrub. It squeaks as it cleans.
• TOM CAT: a grab-style scrub for bee mess and the waxy residue under it. Tom Hay, a window cleaner in Perth, Australia, found it after testing material after material. It eats bee poo.
• Carborundum: our most aggressive pad. Silicon carbide (hardness 9.0) cuts tough debris off glass (hardness about 6.5). It won't scratch real glass because the foam backing gives under pressure and the pad is large. Use it on real glass only.

Treated glass (like E-Glass and clear polymer panels) can scratch with any abrasive scrub. Test a small area first.

Stainless mesh ("the cheesegrater") scrapes paint overspray, caked-on dirt and sticker residue. For the toughest bonded debris, step up to carborundum, on real glass only. Treated glass (like E-Glass and clear polymer panels) can scratch with any abrasive scrub. Test a small area first.

Shipping is calculated at checkout by weight and destination. We ship across the U.S. and worldwide.

Every REACH-iT product comes with a 1-year manufacturer warranty. Worn scrubs and spare parts are stocked, so you can keep the brush cutting long after that.