The Kingpin: FLOW RED+ Pure Water Bundle

What's in the bundle

• You pay forFLOW RED+ with FREE POLE / BRUSHWhy pros buy it $2,084.50
  

  FLOW RED+ with FREE POLE / BRUSH

  ×

  Why pros buy it

  • Small and light: 16" x 22" / 41 x 56 cm base, 50 lb / 23 kg dry. Lifts in and out of any vehicle.
  • See your water: dual TDS meter (in and out) plus pressure and temperature gauge.
  • Twin 4021 'zero pressure' RO membranes, with sediment and carbon pre-filters.
  • Easy upkeep: built-in RO flush valve, easy-fill DI tank and tool buckets.
  • Anti-theft cable lock, and a housing for an optional pump.

  See the full product page
• REACH-IT MINI WATER FED POLEWhy pros buy it Normal price $649 Free
  

  REACH-IT MINI WATER FED POLE

  ×

  Why pros buy it

  • Pull-apart tech: sections 1 and 4 pull out for a shorter, lighter pole on lower windows.
  • 35 ft / 10.7 m of reach from a pole that packs down to 4' 8" / 1.42 m.
  • Need more height? Add one PLUS B extension for 43 ft 4" / 13.2 m of reach.
  • Kevlar SHOCKSTOP insulator handle included, to reduce the risk of electric shock.
  • Built to be serviced: replaceable nylon clamps, stainless steel end defenders and stocked spare sections.

  Specifications

  Reach

  35 ft / 10.7 m (with SHOCKSTOP)

  Extended length

  30 ft / 9.1 m

  Compact length

  4' 8" / 1.42 m

  With extension

  43 ft 4" / 13.2 m (1 x PLUS B)

  Weight

  7 lb / 3.2 kg

  Sections

  7 + SHOCKSTOP handle

  Composition

  100% carbon fiber

  Clamps

  Nylon, replaceable

  Pole tip

  Pole to handle stem adaptor

  Insulation

  Kevlar SHOCKSTOP handle included

  Pull-apart

  Sections 1 and 4

  End defenders

  Stainless steel

  Expected life

  10 years

  See the full product page
• SHOCKSTOP : The Insulator Handle / ExtensionProduct details Normal price $273.90 Free
  

  SHOCKSTOP : The Insulator Handle / Extension

  ×

  Product details

  SHOCKSTOP is the #1 SAFETY PRODUCT from REACH-iT!

  KEVLAR Insulator Handle:

  As well as minimizing your risk of electric shock, you can use SHOCKSTOP to extend any Reach-iT Pole by up to 5FT.

  KEVLAR is an amazing material - it is incredibly light, very rigid, and totally non-conductive. That's why we chose to use Kevlar to make SHOCKSTOP - this 5ft extension weighs in at less than 1lb!

  HOW IT WORKS:

  SHOCKSTOP is a #8 section in the REACH-iT range. All PROFESSIONAL REACH-iT poles are 7 sections - so SHOCKSTOP is compatible with them all.

  • Open the top clamp of SHOCKSTOP
  • Slide SHOCKSTOP over the handle of your Reach-iT Pole to your desired position.
  • Adjust and close the clamp.

  Your Operators' can use SHOCKSTOP as a handle over the main pole handle, or as an extension handle, overlapping at least 8" at the base of your pole handle.

  You can store SHOCKSTOP on the pole, or separately, as it suits you.

  SHOCKSTOP & CONNECT

  Using REACH-IT CONNECT, you can use SHOCKSTOP with any Reach-iT pole even after pulling it apart to use less sections (for example, sections 5,4,3,2,1 of a WARRIOR, or PRO, or sections 4,3,2,1 of a MINI or TACTICAL). You can also CONNECT your SHOCKSTOP to a PLUS ABB extension pole.

  Designed in accordance with the Reach-iT Rules - FASTER, BETTER, SAFER, this safety handle delivers universal protection and maximum useable functionality.

  In particular, we chose to make SHOCKSTOP from KEVLAR instead of fiberglass (also non-conductive) to ensure the principles of lightweight, and rigid are at the core of our design - neither of which are delivered by using fiberglass.

  SHOCKSTOP comes included in the TACTICAL ELITE and WARRIOR ELITE PACKS.

  Invest in SHOCKSTOP for your work crews today - it will earn their respect, and it may save a life !

  CONTACT US:

  Message us on live chat or email support@futureofcleaning.com to discuss the application of SHOCKSTOP to your existing Reach-iT Pole, or to determine if it is included with your new pack.

  See the full product page
• REACH-iT STRAIGHT ADAPTORProduct details Normal price $53.90 Free
  

  REACH-iT STRAIGHT ADAPTOR

  ×

  Product details

  Fit any RADIAL TOOL including G-FORCE and Z-FORCE to the top clamp of any REACH-iT brand pole with these adaptors. These are not 'connection only' like the square quickloc system. These adaptors double as a 'QUICK SWITCH' tool and also to 'CONVERT' your Water Fed tools to HAND TOOLS to operate more ergonomically when facing glass within reach of your hand naturally.

  This is all made possible by the RADIAL HANDLE - an ergonomic grip for every tool you own, and the BRUSH WALL MOUNT for storage when you are not using the tool. It keeps your vehicle tidy and protects your tools when not in use.

  Crafted from high tensile aluminum and then finished with a hardened anodized treatment, your RADIAL Adaptors will last your lifetime, not just the life of the pole, or a couple of years like plastic fittings.

  STRAIGHT STEM : This is your go-to adaptor - it connects to your brush to your REACH-iT pole and you have your PIVOT and ANGLE ADAPTOR functions above the handle for adjustment.

  See the full product page
• RADIAL HI-FLO Tube75 ft / 22.9 mProduct details Normal price $137.50 Free
  

  RADIAL HI-FLO Tube 75 ft / 22.9 m

  ×

  Product details

  
  

   

   WHAT'S IN THE PACK:

  RADIAL HI-FLO TUBE: either 75ft or 150ft

  10:10 PUSHFIT: enables you to connect any two lengths of HI-FLO

  10 PUSH-FIT to GARDENA MALE (gives you the flexibility to connect to any fitting with GARDENA FEMALES)

  COLLAR LOCKS: prevent any PUSH-FIT from coming open unintentionally.

  WHEN TO USE: 

  HI-FLO can be used along the ground for 75-150 FEET to have a more convenient delivery hose, AND up the pole right to the #1 clamp, or straight to your RADIAL brush! 

  SPECIFICATIONS:

  RADIAL HI-FLO is 10mm (approx 3/8") OD tube.

  REMEMBER : The longer the tube or hose, no matter the ID, the less flowrate will be available at the brush, so always use the shortest practical length, transporting water with the largest practical ID.  Typically, stepping down the ID over distance preserves flowrate better (so use 150FT (50m) 5/8" (16mm), then 150FT (50m) 3/8" (10mm) over long distances).Our target is 1/2GPM (2LPM) at the RADIAL BRUSH. 

  HI-FLO PACK:

  This pack is designed to give you the maximum flowrate through HI-FLO TUBE to your RADIAL brush.

   If you choose 150FT, we give you another 10:10 PUSH-FIT ADAPTOR so you can cut HI-FLO into two lengths (eg. 75/75 or 100/50) and easily re-join them for longer run situations. Remember to reconnect and use the COLLAR LOCK CIR-CLIPS to avoid unintentional disconnection.

  HI-FLO is designed for delivering more water to all RADIAL BRUSHES. We know categorically that you can USE LESS TIME by using more FLOW-RATE during the ON-GLASS-RINSE phase.  Overall, if you accelerate your work at a higher rate than the increase in flow-rate, you will actually USE LESS WATER VOLUME.
  

  You CAN use HI-FLO on a reel.

  See the full product page
• RADIAL LITE 14" (100% NYLON)Why pros buy it Normal price $196.90 Free
  

  RADIAL LITE 14" (100% NYLON)

  ×

  Why pros buy it

  • Clean in one pass - patented tool: scrub on the up-stroke, rinse on the down-stroke, without lifting the brush off the glass.
  • Dual-trim bristles in 4 rows. Press harder to bring in the stiffer inner bristles for tougher dirt.
  • Light enough for flexible and lightweight carbon poles that are too soft for a full RADIAL.
  • Arced end bristles roll through corners to clear spider webs and nests.
  • PIVOT swivels to any angle, even below the waist. Fits most poles with the matching adaptor.

  Specifications

  Width

  14" / 35.6 cm

  2 passes

  cleans a 26" / 66 cm pane

  Construction

  All-Bristle, dual trim, 4 rows

  Agitation

  3 / 10

  Rinse flow

  5 / 10

  Rinse bar

  HYDRO-BLADE II+ low flow, 1/3 GPM / 1.3 LPM

  Bristles

  Nylon, holds its shape up to 200°F / 100°C

  Tubing

  Works on 5/16" / 8 mm OD, best on 3/8" / 10 mm OD

  Fits

  Any pole, with the matching adaptor

  Warranty

  1-year manufacturer warranty

  See the full product page
• LITESPEED 18" BRUSHWhy pros buy it Normal price $273.90 Free
  

  LITESPEED 18" BRUSH

  ×

  Why pros buy it

  • Clean in one pass - patented tool: it scrubs on the up-stroke and rinses on the down-stroke, so there's no going back to rinse.
  • Convertible: it works as an all-bristle brush, and you press harder to bring in the scrub pads for spot dirt like bird or bee mess. You choose on the glass.
  • Dual-trim nylon bristles with a center scrub pad, sitting between RADIAL LITE (3) and ULTRA-LITE (7) for agitation.
  • Ships with low-flow HYDRO-BLADE II+ bars (1/3 GPM / 1.3 LPM) for 5/16" / 8 mm tube, plus Hi-FLO bars for 3/8" / 10 mm tube.
  • Scrubs in the box: 5 each of non-scratch, carborundum, TOM CAT and magic eraser.

  Specifications

  Width

  18" / 45.7 cm

  2 passes

  cleans a 34" / 86 cm pane

  Construction

  Convertible Dual-Agitation, dual-trim nylon bristles + center scrub pad

  Agitation

  5 / 10

  Rinse flow

  5 / 10

  Rinse bar

  HYDRO-BLADE II+ low flow, 1/3 GPM / 1.3 LPM, Hi-FLO bars in the box

  Bristles

  Nylon, holds its shape up to 200°F / 100°C

  Scrubs in the box

  5 each of non-scratch, carborundum, TOM CAT, magic eraser

  Tubing

  Low-flow bars for 5/16" / 8 mm OD, Hi-FLO bars for 3/8" / 10 mm OD

  Fits

  Any pole, with the matching adaptor

  Warranty

  1-year manufacturer warranty

  See the full product page
• RADIAL ULTRA-LITE 22" MAXWhy pros buy it Normal price $372.90 Free
  

  RADIAL ULTRA-LITE 22" MAX

  ×

  Why pros buy it

  • Clean in one pass - patented tool: it scrubs on the up-stroke and rinses on the down-stroke, so there's no going back to rinse.
  • 22" / 55.9 cm wide for glass-clad buildings: more glass per stroke, and a steadier brush at height and on corner windows.
  • Just 14.8 oz / 420 g with RADIAL HANDLE and PIVOT, light enough to control on a long pole in the wind.
  • Dual-Agitation: angled nylon bristles lift loose dirt while the center scrub pad cuts stubborn dirt in the same stroke.
  • Ships with the low-flow HYDRO-BLADE II+ bar (0.3 GPM / 1.5 LPM) plus a spare Hi-FLO bar (1/2 GPM / 2.0 LPM).

  Specifications

  Width

  22" / 55.9 cm

  2 passes

  cleans a 42" / 107 cm pane

  Construction

  Dual-Agitation, nylon bristles + center scrub pad

  Agitation

  7 / 10

  Rinse flow

  5 / 10

  Rinse bar

  HYDRO-BLADE II+ low flow, 0.3 GPM / 1.5 LPM, spare Hi-FLO bar 1/2 GPM / 2.0 LPM in the box

  Weight

  14.8 oz / 420 g with RADIAL HANDLE and PIVOT

  Profile

  1.5" / 38 mm thin

  Bristles

  Nylon, holds its shape up to 200°F / 100°C

  Scrubs in the box

  21 - 6 non-scratch (1 fitted), 5 each of magic eraser, TOM CAT, carborundum

  Tubing

  Works on 5/16" / 8 mm OD, best on 3/8" / 10 mm OD

  Fits

  Any pole, with the matching adaptor

  Warranty

  1-year manufacturer warranty

  See the full product page

Total price $2,084.50

Free gear included worth $1,958